The mattress factory read so many mattress knowledge information of choose and buy, many friends must be curious, how mattress made?
Follow the hao below small make up together to see!
(
1)
Wear spring spring is a spiral spring connection in the spring mattress into the whole process.
In spring with a diameter of 1.
2 to 1.
6 mm 70 # carbon just winding, winding into pore size slightly larger than the diameter of the be in spring, its clearance within 2 mm.
In spring, the spring mattress in helical spring up and down the adjacent circles were crisscrossed connected into the mattress spring core.
Then the wear on both ends of the spring steel wire by wire clamp ways on the spring coil.
Simple and rapid and is firm and reliable.
(
2)
Blanking quilting layer consists of two parts, and respectively connected with the mattress spring bed core, clipping to set aside when quilting layer and surrounding edge sewing allowance, common practice is to make the non-woven fabric is greater than the fabric size when quilting, grow with non-woven fabric part connected to the surrounding edge steel, fastening, make quilting layer on the surrounding edge of steel.
As a result, the cutting allowance to set aside non-woven composite fabric.
In addition, when both sides mattress using bag new decoration, but also reserve package under the new strain fabrics concave allowance.
(
3)
A blanket pressure palm palm fibre mat out: will be ready for 15 to 30 mm thick bedding material on the upper and lower two parts of the mattress and around, and the bedding material mat revolver fasteners on the surrounding edge of steel.
Test good bedding material bed core have raised, nail gun, gun nail tip if both ends sticking out cotton blanket, the bed core surface clean without sundry.
(
4)
Surrounding edge two layer quilted with surrounding edge with webbing around carefully sewn together, formed on the surface of the mattress, the two outside of edge thick line.
Straight hemming requirements, all round arc even symmetry;
Usually adopts overlock sewing machine (sewing, forming the mattress.
(
5)
Inspection on the horizontal mattress pad on vertical soil fertility down, cause the mattress surface along the stress direction of displacement, qualified to packaging, sealing, after the product to the factory.
www。
cqyhcd。
com
