What types of springs are available in elastic mattresses?

Author: Synwin–Mattress Suppliers

Mattress manufacturer's open spring: Its structure is similar to the linked spring structure, which is different from the two ends of the spring used, which has a pressure buffering effect. Features: The open spring structure makes the local movement of the spring mattress not too violent, and can alleviate the shortcomings of poor anti-interference and poor fit of the linked spring structure to a certain extent. It has been widely used in the early and mid 20th century, but At present, it is rarely used abroad, because its performance cannot be compared with that of the independent barrel spring. 2. Independent barrel spring: Packed with non-woven or cotton cloth, and then sealed with glue or ultrasonic waves, the more spring coils, the greater the softness.

Features: The independent tube mattress springs are not connected by wire loops, but are independent. Even if the person next to the pillow turns over and moves sideways, it will not affect the sleep of the other person. The body will not be sore from being suspended in the air. 3. Partition spring: The leaf spring is developed based on independent springs, divided into three zones, seven zones, and nine zones, of which the nine-zone independent spring is the best. Features: There is no pressure on the spine in any sleeping position. All parts of the human body that are always flat and stretched are evenly stressed, and the body can be relaxed.

4. Connecting springs: Connecting springs Synwin mattresses use steel wires to connect and fix a circle of springs with a thicker wire diameter. Features: High hardness, it feels hard to sleep, and has good support, but the elasticity is not clear, it is easy to get involved, sleep in a fixed position for a long time, sit on the edge and four corners of the bed, or turn the mattress irregularly, which is easy to cause depression and elastic fatigue. 5. One-line steel spring: Use a continuous steel wire to wrap every spring of the entire mattress from the head of the bed to the end of the bed, and then connect them in parallel to create this so-called "one-line steel".

Features: The first-line steel spring structure has a history of more than 30 years, with less material and low cost. Its characteristics are similar to the connecting spring structure, with poor anti-interference and fit, and easy to collapse. It is a good choice for cheap spring home mattresses abroad. 6. Honeycomb spring: The honeycomb spring mattress is an independent cylinder mattress, its material and production method are the same, but the honeycomb independent cylinder is characterized by staggered arrangement, which can reduce the gap between the springs and improve the support. and elasticity. Benefits: Reduces traction on the mattress surface, conforms to human curves, improves average pressure distribution and softness and elasticity for sleep sensation.

Author: Synwin–Custom Mattress

Author: Synwin–Mattress Manufacturer

Author: Synwin–Custom Spring Mattress

Author: Synwin–Spring Mattress Manufacturers

Author: Synwin–Best Pocket Spring Mattress

Author: Synwin–Bonnell Spring Mattress

Author: Synwin–Roll Up Bed Mattress

Author: Synwin–Double Roll Up Mattress

Author: Synwin–Hotel Mattress

Author: Synwin–Hotel Mattress Manufacturers

Author: Synwin–Roll Up Mattress In A Box