Synwin luxury bonnell coil high-density with coil

  The first step is to clean and remove dust. We can use a vacuum cleaner or a mite removal device at home to clean up the dust, dead skin and other dirt on the upper and lower surfaces of the mattress as a whole. The most important purpose of this step is to remove dust and remove the dirt attached to the surface.  The second step, decontamination and deodorization, dehumidification and mildew proof. Using baking soda has the effect of decontamination and deodorization. We sprinkle the baking soda evenly on the mattress, pat it evenly, and wait for 15-20 minutes. After the odor on the mattress is eliminated, use the vacuum cleaner at home to remove the mattress. The soda powder on the top is soaked up, and by the way, the dust and dander will be absorbed together again, so that the mattress can be cleaned, stains and odors removed.  The third step is to remove bacteria and kill mites. The mattress has never been washed after long-term use. After a long time, there will naturally be a lot of bacteria and mites on it. For our health, we must kill bacteria and mites. This time I used alcohol. Everyone knows that alcohol has the effect of killing bacteria and insects. Dilute the alcohol with water and moisten the cloth, then use this cloth to wipe all parts of the mattress, and brush it with a soft brush. The sterilization effect of alcohol can make the bacteria and mites on the mattress nowhere to hide, for 10 minutes Can sterilize and kill mites.  The fourth step is to clear the yellow stains to get rid of the peculiar smell. If you have a baby at home, you will inevitably get some urine stains on the mattress. Not only will there be a yellow diaper mark, but also a peculiar smell. At this time, we can spray white vinegar on that piece. White vinegar can decompose yellow stains and remove peculiar smells. After spraying white vinegar for 1 hour, wet the towel and press it a little bit, or use a napkin with better absorption, until the stains and odors are absorbed cleanly.  Maintenance of the mattress after cleaning. The spring mattress will squeak when you turn over after sleeping for a long time. This is caused by the intrusion of moisture and sweat from the human body over time, causing the internal springs of the mattress to rust. Knowing the reason, we can solve it by removing the moisture. We can use some desiccants, such as activated carbon packs, to keep the mattress dry, and to absorb peculiar smells, and give you a healthy and comfortable sleeping environment.

Why the mattress should be compressed?Compressed mattresses are mostly used for export, because the ocean freight is very expensive now. The compressed mattress greatly reduces the size of the mattress and saves space. Each cabinet can contain as many products as possible, which can help customers reduce transportation cost. But now domestic mattresses are also partially compressed, which is convenient for delivery.How can the inner bed core be deformed after compression, unless the quality of the spring itself is not good enough. The spring of the compression mattress is specially made. The round spring generally has a larger core diameter (to prevent deformation and tilt), and the caliber is also larger (mainly to reduce costs); the independent cloth bag is yellow, with good performance and no special requirements.In use, the spring itself is in the process of constant rebound and downward pressure. As long as the quality of the spring passes, it will not be deformed.

Where did the cabinet go?Recently, all foreign trade people have deeply felt the fact that ocean freight has risen to the point where one can doubt one's life. It is harder to grab a cabinet than to grab a train ticket during the Spring Festival.A large shipping company over there was originally going to increase 100/200USD, but upon seeing Wan Hai’s notice, it immediately changed to 250/500USD.The usual freight rates of these routes are only between 100-200 USD.Here comes the question:The soaring freight rate makes it hard to find a container. Is it really just because of the epidemic?1) Cause of the epidemicDue to the second round of counterattack by the epidemic in Europe, many European countries have begun to lock down cities again, and people cannot work and live normally, causing the cabinets to get stuck in major ports.The wharf is full of cabinets, and even the exemption period is much shorter than before.Before, you can apply for a two-week or even longer free storage period at the port of destination. Now I am sorry, please remove all the cabinets within a week, otherwise you will have to pay extra rent.Obviously, the status of the locker stuck in the port of destination has no return, which directly leads to a decrease in the number of domestic lockers.If only the quantity is reduced, it will not reach the point where it is hard to find a cabinet, and the worse situation is still to come.2) Foreign trade orders skyrocketedThe epidemic has reduced the productivity of other countries in the world a lot. The production capacity of many countries is basically paralyzed. China has become the center of the world's factory in a short time.Orders from Bangladesh, Vietnam, India and other Southeast Asian countries have been transferred to China.I don't know how the other industries are, but as far as the small home appliance industry I do, my orders are now 300% of the same period last year, but the delivery period is 40 days longer than last year.The long delivery period is due to the fact that foreign trade companies have too many orders, which has caused their domestic suppliers' orders to increase sharply, and they cannot deliver goods on time.3) Shipping companies lootingThe Southeast Asia route was not affected much, but as soon as the shipowner saw that the European route rose so aggressively, he immediately smelled the smell of money.As a result, it began to artificially reduce the routes to Southeast Asia, deliberately causing a tight space, thereby greatly increasing the freight.For shipping companies, cutting routes means reducing costs; Increasing shipping costs means that operating costs will not decrease or even increase.In this way, it is easy to achieve the purpose of greatly increasing profit margins and obtaining huge profits in the short term.Realistic reasons + man-made reasons eventually led to the current situation of hard-to-find containers and skyrocketing freight rates.

The first process is neither spring making nor cotton fabric, but incoming material and incoming material inspection. This is the primary process of production, and it is a process that must be strictly controlled. The appropriateness and qualification of raw materials is directly related to the production and quality of the finished mattress.The second process is quilting and threading, which are two separate and simultaneous processes. Padded cotton is to transfer the cotton cart used in mattress fabric to the fabric. The final form of expression is the top and bottom layer of the mattress; the threading is to connect the spiral springs into a whole, which is a chain spring mattress. The process of independent bag and independent tube spring is to pack each spiral spring into a strip, independent non-woven bag, and then glue the cloth bag strip with the spring into a whole.The third process is to make the cutting bed and the bed net. The cutting bed is to cut the cotton fabric to the size of the mattress; the bed net is made, and the spring net formed by the spring, the chain spring net or the independent pocket spring net is fixed with the frame iron, thereby forming the bed net.The fourth process is the bottom line. The bottoming is to lay cotton felt or other cushions on the bed net, and then place a good cotton fabric.The fifth process surrounds. The rim is to sew together the upper and lower fabric layers laid in the previous process with a rim tape, so that a mattress is made.The final step is finished product inspection and packaging, so that the entire mattress process is completed.