How to maintain the bed?

Author: Synwin–Mattress Manufacturer

How to maintain the bed? Bed frame ① Ensure firmness and stability. The bed frame is the support of the bed and must be firm and stable. It can bear the force. On the one hand, the bed frame itself must be firm and intact without damage. No shaking and no sound when subjected to force or pushing and pulling: On the other hand, the foot of the bed should be firm and intact, without damage and loosening, easy to push and pull, and not damage the ground when pushing and pulling. ② Keep it clean. To keep the bed frame clean, one is to Anti-dirty: The second is to remove dust in time. In order to prevent the bed frame from being soiled, you can put a bed skirt on the bed frame, and use the bed skirt to protect the four sides of the bed frame. When the bed skirt is found to be stained, it should be replaced and washed in time. : If there are stains on the bed frame, it should be scrubbed and removed in time. (2) Foshan Mattress Factory Cushion ① Keep it clean. Add a mattress on the cushion. A layer of absorbent, easy-to-wash mattress must be added to the upholstery.

This is the basic measure to keep the cushion i green. Because this layer of mattress has the function of barrier, so that the cushion is free from contamination. And the mattress is easy to wash, once there is stains, it can be changed and washed at any time. ② Dust removal and stain removal. The waiter should always use a vacuum cleaner to remove the dust on the cushion. If there is any stain on the cushion, remove it in time. When removing the stain on the cushion, the cushion should be erected. Use a soft brush and Scrub with a suitable detergent. Then use a dry cloth to absorb the moisture. Then blow dry with a hair dryer or let it dry. When removing stains from the cushion, do not lay the cushion flat, because this will penetrate the water and detergent into the spring steel grave 3. Prevent damage and deformation. Regularly turn over and exchange the placement. Make plans according to the usage. Turn the cushion regularly. This can balance the force on each part and avoid local uneven deformation. To control, usually mark the two ends and both sides of the cushion. And make uniform regulations for the ft. flip. ④ Pay attention to inspection. Repair in time. The waiter should always check whether the fabric of the cushion is damaged and whether the piping is damaged. , Whether the spring is loose or falling off. If it is found that it is repaired in time, if it cannot be repaired, it should be replaced in time. ⑤Pay attention to moisture-proof. Moisture will cause the spring of the cushion to rust and make other materials mildew, so pay attention to moisture-proof.

One is not to artificially get water or other solutions on the cushion; the other is to keep the room dry. And often let the cushions ventilate.