How much do you know about the internal structure of tatami?

Author: Synwin–Custom Mattress

Usually, the tatami we see is the side of its beautiful appearance, and we don't know the internal structure of the tatami at all. Some people are very curious about the interior of the simple and beautiful tatami. Next, the editor of the Foshan Tatami Bed will share with you the internal structure of the tatami, so that you can have a deeper understanding of the tatami. 1. The internal structure of tatami The structure of tatami is divided into three layers, the upper layer is covered with rush mat, the middle is straw mat, the bottom is insect-proof paper, both sides are wrapped with cloth, and there are usually traditional Japanese patterns on the edges. .

So how to install tatami in life is more practical? 1. Nowadays, many people choose to install tatami on the balcony. The reason is that there is sunlight, and it is comfortable to stay in the sun in the afternoon. However, I remind everyone to do a good job of waterproofing the balcony. After all, the original material of tatami is wood, so as to avoid corrosion. . 2. Under normal circumstances, the size of tatami can be divided into the following two situations: ① Regular rectangular tatami, the length is 1800mm, the width is 900mm, and there are 3 standards for thickness, which are 35mm, 45mm, and 55mm. 3. When decorating the tatami, it is necessary to leave a ventilation hole on the bottom frame, which can ensure the circulation of air and avoid problems such as insects, rot, corrosion and so on in the humid air festival.

4. When we design tatami, the bottom is a better storage space. Therefore, it is necessary to do a good job of the load-bearing measurement of the panel to avoid unnecessary accidents. However, it should be noted that if the tatami is used for sleeping, then the bottom should not be used for storage, which is easy to damage items.

5. When designing tatami, it is necessary to order the lift platform in the middle of the tatami in advance, so as to better determine the size of the tatami, which greatly reduces the error and makes the tatami more convenient to use. 2. What are the defects of tatami in life? 1. The design of tatami that needs to be directly against the wall or against the window on three sides is generally surrounded by three walls or windows, and even part of it is still against the outer wall. If you encounter it when you sleep, it will feel cold, and you need to stick a special thick wall cloth. OK, if the wall covering is not elastic, it is very uncomfortable to sit by; in the area by the window, it is easy to have the cold wind squeezed in through the crack of the window, especially the north-facing window, it needs to be matched with thick curtains and bamboo Curtain will do. 2. Sound insulation problems Usually tatami rooms have poor sound insulation, mainly because the sliding doors are relatively light and thin, and the sound insulation effect is poor; it is still necessary to choose a relatively heavy wooden door as a sliding door, and you can also install sound insulation strips, so as to solve the sound insulation Bad question.

3. For mattresses that require tatami, you should choose imported latex pads, mainly due to the lack of domestic elasticity; do not choose spring pads. Once the quality is not good, it is very easy to damage. If it is a spliced ​​mattress, each other 4. The environment requires many tatami mats are not suitable for wet ground floor installation. The higher the floor, the better, so it is relatively dry, and the room where the tatami mats are located requires good ventilation. 5. Height limitation Most of the storage space under the tatami mat needs a certain height, at least a height of 40cm on the floor, so that it is convenient to put things. At this time, the indoor space will be relatively low, the ceiling will be difficult, and a bed should be added. The mattress was comfortable to sleep in. Moreover, it is inconvenient to walk up directly, and you need to add steps or feet; if you only make a tatami mat with a height of ten centimeters, it will not be practical enough.

The editor's sharing of the Foshan tatami bed above is over, and it can be seen from the internal structure diagram of the tatami that its interior is actually similar to the interior of an ordinary cabinet, but there are more stacked storage areas inside the tatami, and the storage capacity is also very sufficient. . Therefore, if you want to place tatami, you must pay attention to the height, and the quality is also very important.