Foshan Mattress Factory: The harm of defective mattresses cannot be ignored

Author: Synwin–Mattress Suppliers

At present, some manufacturers in the market advertise to consumers that the thicker the mattress is, the better. This is completely misleading. Please do not believe it. The harm of defective mattresses cannot be ignored. The hazards of defective mattresses are mainly in the following aspects: 1. Filled with low-density foam plastics exceeding specifications, the density of standard filled foam plastics cannot be lower than 22kg per cubic meter, because the use of low-density foam plastics will make the mattress in It collapses rapidly in a short period of time after use, and may even cause the spring wire to pierce the cushion surface and hurt people. 2. Increase the number of spring coils beyond the standard (some increase by one or even two coils). On the surface, the mattress is much thicker, but because the spring exceeds the standard, the life of the mattress is greatly reduced. After the spring has undergone 80,000 durability tests, The amount of elastic compression cannot reach the standard (over 70mm), causing consumers to suffer losses.

3. If the filling amount is too thick or too much, the ventilation performance of the mattress will be too poor, and it is easy to breed bacteria and cause skin diseases due to skin hypoxia. 4. A large amount of waste material is filled, so that the mattress not only fails to meet the technical standards, but also causes diseases due to the deformation of the spine due to the mattress being too hard or too soft to sleep for a long time. 5. The height of the spring exceeds the standard, making the mattress too soft, and some young people who are growing and developing are prone to rickets and so on.