Common Ways to Repair Air Mattresses

Author: Synwin–Custom Mattress

Air mattresses have to be deflated when it comes time to patch, and luckily most can be repaired by patching holes. To do this, you must find the leak and clean the surrounding area, and then apply the patch. Of course, the specific implementation process is still relatively complicated and requires careful attention. Deflation.

The mattress manufacturer introduced to repair the air mattress, pay attention to loosen the plug, release the air, lay the mattress flat on the ground, and press out the air trapped in the mattress by hand. Clean spill area with isopropyl alcohol. Sprinkle some isopropyl alcohol on a towel or cotton ball, wipe the spill and surrounding material to remove any debris, when done, allow the mattress to dry completely, if isopropyl alcohol is not available, place a teaspoon of liquid soap in a glass of water , then use it to clean the area.

Make a patch out of clothing when you don't have plastic. First wash the torn area with isopropyl alcohol, cut a patch from an old shirt or another piece of cloth, use superglue if possible, and press the patch for at least 6 hours. Just temporarily seal the hole with tape.

Clean up the damage and lay the strap flat on the hole. The mattress can be used overnight, but the straps will loosen over time. Replace it with a stronger patch when you get the chance.

Seal the small holes with a hot glue gun. The mattress manufacturer introduced that when repairing an air mattress, pay attention that the glue gun can block small holes, be careful not to let the gun touch the mattress, preheat the gun, then fix the tip on the hole, and slowly move the gun to the hole on until it is filled.