Bed ɗin Ajiya: Maido da Wurin da Ba a Yi Amfani da shi ba! (Kyaftin Bed)

Shin kun taɓa tunanin cewa gadon ku na banza ne?
Ko sharar ta baci (
Ko kuma wani abu da wasu ke kira shi \)
Kullum ana mantawa a ƙarƙashin gado.
Na gane cewa hanyar magance waɗannan matsalolin biyu ita ce samun gadon ajiya.
Yana ba ku damar yin amfani da sararin samaniya da kyau, kiyaye komai mai tsabta da tsari.
A cikin wannan Umarnin, zan nuna muku yadda ake ƙirƙirar gadon ajiya akan kuɗi kaɗan fiye da dillali.
Na sami yawanci suna siyarwa akan $1000!
Farashin da aka gama na wannan gado da allo yana tsakanin $300 zuwa $400 kuma na gama shi da launi da nake so!
Wannan gadon gado ne mai girman girman sarauniyar Arewacin Amurka mai jumulla guda shida.
Na yi amfani da gorilla Glue da maɓalli daban-daban a cikin ayyuka da yawa (
Zan yi bayani dalla-dalla a cikin kowane mataki).
Mafi amfani amma kayan aikin da ba dole ba shine ƙirar firam (
Yana taimakawa tare da zane-zane da kafafu). Jerin Kayan aiki:-Hammer-Drill-Saw (
Sashin madauwari na iya aiki, amma an fi son gani mai karkata - Tebur saw-Sander-Frame Clamp-Aunawa Tef-
Jerin kayan: -Manne itace-Gama ƙusoshi (masu girma dabam) - Screws (masu girma dabam) - Sandpaper (
Haɓaka iri-iri daga 60 zuwa 220 - Lumber (
Daidaitattun lambobi da girma don kowane mataki) - Pre-
Rinyen kwandishan itace Tabo-Clear gashi (e. g. varathane)Kayan aiki:-Saw-Frame Clamp-
Kayan Guduma:-
2 \" cika DingTalk-Wood Glue-
3 gama 2x6x8 fara kafa kafa na.
Na gama 1x6 kuma na yanke guda 2 ga kowace kafa, wanda shine tsayin da nake son isa a kasan waƙar (
Na tafi da inch 12. .
Na yanke guda 3 ga sauran ƙafafu biyu.
5 inch tsawo (nisa na 2x4).
A matakai na gaba, za ku fahimci dalilin da ya sa.
Na haɗa waɗannan guda biyu tare, DingTalk su tare da gamawa, haɗa guda biyu a lokaci ɗaya cikin siffar L.
Daga nan sai na haɗa su biyu tare don yin murabba'i.
Anan ne ake amfani da faifan firam don kiyaye komai Square.
Tabbatar cewa sassan biyu masu tsayi suna kusa kuma gajartan biyu suna kusa.
Za a sami wasu itacen da suka wuce gona da iri akan ɗayan mafi tsayin sassa waɗanda za'a iya cirewa tare da tsinken tebur ko gani na hannu.
Wannan don ba da damar waƙar ta tsaya akan gajerun abubuwa. Kayayyakin aiki:-Saw-Hammer-Kayan hakowa:-2 \"kammala DingTalk-
2 Cikakkun 1x12x72 \"-
2 Cikakkun 1x12x96 \"-
4 karfe kaho5/8" sukurori-
Ƙungiyar manne katako na waƙa yana da sauƙi.
Ina gina wannan gadon a cikin bene na, don a kwatanta cewa dole ne in cire shi wata rana, na makale kusurwoyi biyu masu gaba da juna na dora tasha a kan sauran biyun.
Ta wannan hanyar, ana iya ɗaukar shi daban kuma a ɗaga matakan hawa.
Yanke titin jagora zuwa tsayi da faɗin da ake buƙata don girman katifa da kuke da shi kuma barin inci ɗaya na sarari kusa da katifa.
Girman katifa na Sarauniya a Kanada yana da inci 60 da 80 inch, don haka girman ciki na firam ɗin shine 61x81.
Lokacin yankan titin kan da ƙafa, tabbatar da yin la'akari da ƙarin kauri na layin gefen.
Idan kaurin waƙar ya kai 3/4 \", dole ne a ninka shi akan tsawon waƙar kai da ƙafa. 61+3/4+3/4=62. 5.
Tabbatar cewa an gyara kan ƙusa kuma a cika shi da cika itace sannan a goge shi da yashi. Kayan aiki:-Kayan hakowa:-
8 shiryayye
5/8 \"Haɗa ƙafafu zuwa allunan ƙarfe a kan dogo kuma na sanya su a kan dogo kamar gadon yana kife.
Na yi amfani da madaidaicin shiryayye na yau da kullun don waɗannan gidajen haɗin gwiwa saboda suna da ƙarfi da arha.
Saka mafi guntun ɓangaren ƙafar a kan waƙar da mafi tsayi a cikin firam.
Babu manne ko kusoshi a wannan matakin! Kayan aiki:-Saw-Kayan hakowa:-Manne itace-2" sukurori-2 2x4x8\'-
1 2x4x10 \" splints su ne splints da ke riƙe da katakon katako zuwa gefen gado da pallet.
Sun kuma karfafa hanyoyin.
Yanke su cikin ɗan ƙarami fiye da sarari tsakanin maƙallan tara.
Ina manne kashin zuwa kasan waƙar na dunƙule shi.
Domin kafafun gadon 3 ne.
5 \" sama da ƙasan waƙar, za su goyi bayan katakon da ke kusa da kusurwa.
Layout akan pallet.
Na saita tazarar zuwa "tsakiya" aƙalla 12, amma saita zuwa 8 kusa da tsakiyar gadon. Kayayyakin aiki:-Saw-Kayan hakowa:-Masu ratayewa
2 pallets kowanne) (Na yi amfani da 14) -2x4x10" (
1 ga kowane katako 2 (Na yi amfani da 4) -
1 1/2 \" allon guga yana auna kuma yana yanke duk katako na goyan baya.
Idan waƙoƙinku daidai ne, duk tsawonsu ɗaya ne.
Juya rataye zuwa tsatsa don amintaccen pallet.
Ban murɗa pallet ɗin kan wani abu da suke zaune a kan rataye don sauƙin tarwatsawa ba.
Yi amfani da juzu'i na 2x4 don saita tsayin katako a cikin rataye don juye da splin. Kayayyakin aiki:-Hammer-Table saw-Saw-Drilling kayan:-1 1/2" sukurori-Wood Glue-5 1x4x8\'-
Bangare na gaba da za a gina shi ne firam ɗin aljihun tebur.
Na yi amfani da 1x4 don wannan sashe, na cire spinner ta cikin tebur kuma na goge kowane sashe.
Wannan bangare ne a cikin aljihun tebur.
Wadannan an gina su a kan bangarorin biyu masu tsayi don dacewa tsakanin kafafu.
Tabbatar cewa firam ɗin ba su taɓa ƙasa ba, saboda suna iya barin ƙafafu ba tare da tuntuɓar ƙasa ba idan kasan ba daidai ba ne.
Waɗannan firam ɗin an yi su ne da sassa biyu masu tsayi da wasu tubalan tsaye.
Ana dunƙule manne akan kowane haɗin gwiwa.
Tabbatar cewa kowane buɗewar aljihun tebur daidai yake.
Sai na auna kaurin gaban aljihun tashar ƙofar da ke tsakiyar shingen, wanda shine 1x2 (
Ina amfani da 1/2 \"ply\" da 3/4 \" kauri 1x2 a gaban aljihun tebur, don haka na saita shingen ƙofar baya 1 1/4 daga gefen samfurin da aka gama. Kayan aiki:-Kayan hakowa:-
1 1/2 "ScrewsNa jujjuya firam ɗin aljihun tebur 3/4 daga saman dogo jagora \".
Na makala shi sosai zuwa kasan splin.
Matsa cikin firam ɗin kamar yadda zasu goyi bayan aljihun tebur. Kayan aiki:-Saw-Hammer-Kayan hakowa:-3 1x2x8\'-
1 yashi 1/2 plywood tare da 4 × 8 (
Yi amfani da matakai da yawa)-Gama Nails-Screws-
Itace manneDon gina fake drawer gaba a gindin gadon kuma na gina firam mai 1x4 da 1x2.
Daga nan sai in zana wani guntun aljihun tebur na gaba a cikin firam da ke bayan shingen tsakiya da shingen gefe.
Daga nan sai na sanya 1x2 akan plywood don kwaikwayi kamannin gaban aljihuna na. Kayayyakin aiki:-Saw-Kayan hakowa:-1 1/2" sukurori-
6 1x4x8 \"gina firam ɗin don shigar da faifan aljihun tebur, yi amfani da 1 x 4S kuma haɗa su azaman katako mai goyan baya zuwa baya na toshe ƙofar daga baya.
Tabbatar cewa akwai tazara tsakanin kasan pallet 1x4 da kasan firam na gaba na aljihun tebur (duba hoto).
Yi amfani da tubalan don haɗa kowane pallet da juna don taurare su da sanya sararin sararin samaniya. Kayan aiki:-
Table saw material:-
1/2 "Plywood na sandpaper na 4" x8" farantin (
Yi amfani da matakai da yawa) -1 1x6x10 '' (gabatar aljihu)
Farawa mai ban sha'awa yanzu!
Ko kuna amfani da haɗin gwiwa, kukis, zomaye ko wani abu, za ku iya yin drawa yadda kuke so.
Ina amfani da haɗin gwiwar hannu.
Duban waɗannan hotunan zai taimaka muku fahimtar yadda waɗannan ayyukan suke kama da yadda na bayyana.
Gefen da baya na aljihun tebur suna 1/2 kuma gaban da aka haɗe zuwa gaban aljihun 1x6.
Bayan da gaban drawer baba ne kawai (
A zahiri ana kiransa garma saboda suna tare da hatsi.
Yanke a kasan aljihun tebur shine yadudduka 3/8.
Gefen aljihun tebur ɗin suna ba da rabin kauri don sauran sassa da ƙarshen baba.
Na yanke duk abin gani akan tebur.
An gina gaban aljihunan da aka gama kuma an haɗa shi daga baya. Kayan aiki:-Hammer-
Material flap abu:-
Pre-yanke aljihun tebur Manna itace-
1 \" cika drowar taro na DingTalk kuma a ƙara manne da yawa ga kowane rabbet da dado.
Sannan a saka kasan drowar a cikin dado da ke bayan drawer din, sannan a sa bangarorin, sannan a lika bangarorin zuwa bayan aljihun.
Na yi amfani da kusoshi masu laushi guda 1 saboda suna mannewa tare kawai lokacin da manne ya bushe.
Na gaba haɗa gaba da wannan hanya.
Lokacin da kuka ƙusa haɗin gwiwa, yi amfani da shirin firam don riƙe sassan aljihun tebur tare.
Cire kayan aikin firam da zarar an ƙushe duk haɗin gwiwa.
Wannan na iya zama tsari mai cin lokaci sosai, amma na gama zanen kaya shida a cikin kusan awa daya da rabi. Kayan aiki:-Saw-Hammer (na zaɓi)
Abu:-
Takarda yashi 1/2 \"plywood na 1"x8 (
Kamar yadda aka yi amfani da shi a wasu matakai) -5 1x2x8\'-1 \" kammala DingTalk-
Itacen ya zana fatin da ke gaban aljihun tebur ɗin, wanda ya sa su ɗan ƙanƙanta fiye da wurin da za su je.
Yanke 1x2 s don dacewa da ruwa tare da gefen waje na plywood.
Kamar ni, zaku iya amfani da Mitter ko docking.
A saman kowane aljihun tebur, yi aljihun tebur a baya.
Ina yin haka ta hanyar sanya 1x2 akan mitzvah saw dina sannan in zamewa gefe tare da shingen, na rage tsinken gani kadan duk lokacin da ya wuce.
Drawer yayi santsi sosai.
** Ban bada shawarar amfani da wannan hanyar ba.
Ina da gogewa da yawa wajen yin hakan da mitar saw, amma idan ba a yi shi daidai ba, zai iya haifar da mummunan rauni ko yankewa * idan kana da aljihun tebur, yi amfani da na'ura mai ba da hanya tsakanin hanyoyin sadarwa don cire aljihun tebur, ko yanke shi da hannu.
Hakanan zaka iya jawo aljihunan da kantin sayar da ya saya zuwa gaban aljihun tebur.
Don haɗa gaban aljihun tebur, yi amfani da manne a bayan 1x2 s, sa'an nan kuma saka su zuwa gefen waje na plywood.
Kusoshi suna bi ta baya don kada a cika ramuka. Kayan aiki:-Kayan hakowa:-Drawer slides-
3/4 \" allon ƙarfe za ku iya siyan kowane nau'in faifan drawer da kuke so.
Dangane da nau'in da kuka saya, shigarwa na iya bambanta.
Bi umarnin shigarwa don takamaiman faifan aljihun tebur.
Tabbatar shigar da faifan aljihun tebur domin aljihun tebur ya tsaya sama da faifan aljihun tebur, wanda zai tabbatar da rufewa. Kayan aiki:-Kayan hakowa:-1" sukurori-
1 1/2 \"scewsDon haɗa gaban drawer don saka drowa a cikin zamewar da tura shi gaba ɗaya.
Sanya gaban aljihun tebur a cikin sarari kuma tabbatar da barin ƙaramin rata a duk gefuna.
Cire gaban aljihun tebur daga cikin aljihun aljihun.
Kuna iya buƙatar sanya gasket tsakanin gaban aljihun tebur da aljihun tebur don tabbatar da cewa komai ya bushe.
Yi amfani da dunƙule 1 \" lokacin da ake murɗawa a tsakiyar gaba kuma 1 1/2" a kusa da gefen. Kayan aiki: -saw-dill-
HammerMaterials:-1" sukurori-1" kusoshi-13 1x4x8\"-
2 1x4x8 \"don gina allon kai da yanke 10 1x4 s zuwa faɗin gadon.
Sanya su tam a ƙasa tare da gefen mai kyau ƙasa. Wuri 4 1x4s (
48 a cikin wannan yanayin)
Daidai da Batten ɗin ku, an dakatar da 1 zuwa 2 na allon akan Batten.
Saka sukurori a cikin kowane slat kowace a tsaye.
Tabbatar kiyaye slats tare da ƙarancin sharewa.
Da zarar an taru, sai a juye a ƙusa guda 1x2 zuwa sama kuma ku ƙusa yanki a bangarorin biyu.
Sai ku ƙusa jirgin sama na 1x4 a saman kabu da saman 1x2. Kayayyakin aiki:-sander-paint brushes-rags-drop tufafi-
Vacuum material:-sandpaper-pre-
Ruwan kwandishan itace ko fenti-bayyananne (e. g. varathane) Yashi komai.
Zai ɗauki ɗan lokaci, amma za a sami dawowa a ƙarshe.
Tabbatar da tsotse duk kura. Aiwatar da pre-
Ana rina itacen don hana bayyanar da ba ta da tsari.
Gwada tabon ku ko fenti a cikin ɗayan waƙoƙin don samun sautin da ya dace.
Aiwatar da tabo bisa ga jagora a kan tulun.
Bayan yin amfani da tabo, yi amfani da sutura mai tsabta.
Yi amfani da ƴan riguna don samun sakamako mai kyau.
Tsarin rini ya ɗauki ni kwanaki 3 gabaɗaya. Kun gama!
Yanzu za ku iya buga wani katako a kan pallet kuma ku jefa shi a kan katifa.
Na sami wannan gadon yana da ƙarfi sosai kuma tabbas za a ci gaba da amfani da shi a cikin ƴan shekaru masu zuwa.
Ɗauki lokaci akan wannan aikin kuma ku sanya shi cikakke saboda kuna iya ciyar da 1/3 na lokacinku akan wannan gado kowace rana.
Idan kuna da wasu tambayoyi, da fatan za a yi kowace tambaya kuma a buga sigar da kuka gama a cikin sharhi don bitar ku